You can create linear patterns in the sketch by using the “Linear Sketch Pattern” command. To activate the command; click on the command icon in the sketch
Read More Linear Sketch Pattern in Sketch
Tag: Solidworks Tutorial
You can mirror the selected curves in the sketch by using the “Mirror Entities” command. The command copies the selected curves and rotates 180 degrees around
Read More Mirroring Curves in the Sketch
Mirroring Curves in the Sketch
The “Offset Entities” command is used to create offset curves by using the edges or curves in the sketch. Its usage is nearly similar to the “Convert Entities”
Read More Offsetting Edges/Curves in the Sketch
Offsetting Edges/Curves in the Sketch
There are two different commands to project edges and sketch curves to working sketch. Convert Entities Silhouette Entities Convert Entities: Projects the
Read More Projecting Edges/Curves to Sketch
Projecting Edges/Curves to Sketch
You can extend the curves in the sketch by using two different methods in Solidworks. If you want to extend the curve to the next curve, it is better to use the
Read More Extend Entities
Extend Entities
You can trim curves in the sketch by using the “Trim Entities” command. There are five different trim methods. Power trim Corner Trim away inside Trim away
Read More Trim Entities
Trim Entities
You can create texts and you can use these texts to create solid bodies or create features on the solid body in Solidworks modeling To create text Click on the
Read More Creating Text in SolidWorks
Creating Text in SolidWorks
You can create points in the Solidworks sketch by using point commands. The command location on the sketch Command Manager is shown in the figure. Note: Points
Read More Point
Point
Sketch Chamfer command creates chamfers at the intersection of two lines. Command Placement: As shown in the figure; Sketch Command Manager =>
Read More Sketch Chamfer
Sketch Chamfer
Sketch fillet command creates a radius at the intersection of two curves. These curves might be free or connected at the intersection point. To create a fillet:
Read More Sketch Fillet