You can scale a solid body or sheet body in NX. You can change the scale method of the body by changing the type of scale from the first tab.
Methods to Scale:
Read More Scale Body in NX
Tag: Modeling
You can move or rotate the objects in NX. These objects might be a solid body, sheet body, curves, etc. You should be careful when moving objects. Because
Read More Move Object in NX
Move Object in NX
“Rib” command adds a thin-wall rib or rib network by extruding curve/curves set to intersect a solid body.
To activate command:
Home Ribbon Bar => Feature
Read More Rib
Rib
The video tutorial demonstrates the use of "SketchExtrude" and "Edge Blend" commands, available at the provided YouTube link. It offers a visual guide on how to effectively employ these commands within a sketching software environment.
Read More Machine Part
Machine Part
“Face Blend” creates fillet/fillets between faces. You can create fillets between faces that not connected. To create fillet by using “Face Blend” command:
Read More Face Blend
Face Blend
By the default settings of the NX and older versions of the NX, sketches are staying visible even if they used in commands like extrude, revolve, etc… You can
Read More Making Sketch Internal
Making Sketch Internal
You can measure angles by using measure command in the NX CR modeling. In the older versions, there was a specific command to measure angles (Simple Angle
Read More Measure Angle
Measure Angle
By the default NX settings, the Sketch origin method is set as “Specify Point”. That's because sketch origin assigns on the nearest corner on the selected model
Read More Setting Sketch Origin in NX
Setting Sketch Origin in NX
Lifts one side of the sheet metal part through a defined line. Ads flange between the stationary side and the lifted side. To activate command:
Read More Jog
Jog
Activate “Bend” command.
Select a line or create a sketch to draw a line. (“Select Curve” highlighted when the command starts)
Arrange direction and side
Read More Bend