Posted in NX CR 2206

Feature Patterning in NX Modeling

Feature patterning is recreating the feature copies on the defined direction, center, or path.

In NX modeling you can create feature patterns by using the

Continue Reading Feature Patterning in NX Modeling
Posted in Siemens NX

Creating Solid Wall on Sheet Surface in NX

You can create solid walls on a sheet surface in NX. The sheet surface thickens on a specified side or each side through a given thickness.

To create a wall on

Continue Reading Creating Solid Wall on Sheet Surface in NX
Posted in Siemens NX

Scale Body in NX

You can scale a solid body or sheet body in NX. You can change the scale method of the body by changing the type of scale from the first tab.

Methods to Scale:

Continue Reading Scale Body in NX
Posted in Siemens NX

Importing Image in the 3D model in NX

You can import images in the 3d model in NX. The importable image files are jpg, jpeg, tif, tiff, png. The command to import the image is currently hidden in

Continue Reading Importing Image in the 3D model in NX
Posted in Siemens NX

Mirror Geometry

You can mirror solid or surface bodies in the NX. It might be hard to find this command in NX because there are two mirror commands in NX …

Continue Reading Mirror Geometry
Posted in Siemens NX

Face Blend

“Face Blend” creates fillet/fillets between faces. You can create fillets between faces that not connected. To create fillet by using “Face Blend” command:

Continue Reading Face Blend
Posted in Siemens NX

Extrude

Extrude, makes body or surface by extruding sketch, face or closed area. Also, you can extrude curves, edges, surfaces, sections, areas. Shortly you can extrude

Continue Reading Extrude
Posted in NX 11

Draft

Changes face angles through defined references.

To activate command:

Click command on Home Ribbon Bar => Feature Group => Draft

Click command on Menu =>

Continue Reading Draft
Posted in NX 11

Shell

Changes solid body to create a wall by subtracting volume inside the solid body.

To activate command:

Click command on Home Ribbon Bar => Feature Group =>

Continue Reading Shell
Posted in NX 11

Mirror Feature

“Mirror Feature” is the command, copies and pastes features on the model by mirroring through plane or surface. Command activation:

Select

Continue Reading Mirror Feature