Posted in NX CR 2206

Offset Curve in Siemens NX Modeling

You can create an offset curve of selected curves or edges at a specified distance through a specified vector or plane in the Siemens NX modeling.

Continue Reading Offset Curve in Siemens NX Modeling
Posted in NX CR 2206

Creating Intersection Curve in Siemens NX

You can create curves on the intersection of the objects. These intersection curves can be created: on the intersection of objects such as surfaces or solid

Continue Reading Creating Intersection Curve in Siemens NX
Posted in NX CR 2206

Project Curve to Surface in Siemens NX

You can project curves onto the faces of solid bodies, surfaces, or planes in the Siemens NX Modeling. You can project curves along a vector or along a face

Continue Reading Project Curve to Surface in Siemens NX
Posted in NX CR 2206

Drawing Freehand Curve on Surface in Siemens NX

You can draw freehand curves on the nonplanar surfaces in Siemens NX modeling. The model face works as a sketch zone and the curves that you draw stick on the

Continue Reading Drawing Freehand Curve on Surface in Siemens NX
Posted in NX CR 2206

 Creating Curve on Surface in Siemens NX

You can create curves that lie on a surface in Siemens NX Modeling. These curves can be spline or straight. You can use the curve on the surface to divide faces

Continue Reading  Creating Curve on Surface in Siemens NX
Posted in NX CR 2206

Helical Spline in Siemens NX Modeling

In NX modeling, You can create a helical spline curve through a vector/straight line or a splined curve. The created helical splines might have a constant or

Continue Reading Helical Spline in Siemens NX Modeling
Posted in NX CR 2206

Text in Siemens NX Modeling

You can create text in the 3D model in the Siemens NX Modeling application. Text can be created: on a plane at a specified point, direction, angle on a curve on

Continue Reading Text in Siemens NX Modeling
Posted in NX CR 2206

Studio Spline in Siemens NX Modeling

You can create splines by using existing points, or by creating new reference points in NX. There are two different studio spline-creating methods in Siemens

Continue Reading Studio Spline in Siemens NX Modeling
Posted in NX CR 2206

Creating Circle in 3D Siemens NX Model

You can create Circles by using the “Arc/Circle” command in NX Modeling. If you want to create a circle change the setting in the dialog box as shown in the

Continue Reading Creating Circle in 3D Siemens NX Model
Posted in NX CR 2206

Creating Arc in 3D Siemens NX Model

You can create Arc by using the “Arc/Circle” command in the 3D model. To create Arc: Start the “Arc/Circle” command. (The command location on the “Curve Ribbon

Continue Reading Creating Arc in 3D Siemens NX Model