Extrude Command makes body or surface by extruding sketch. Also, you can extrude curves, edges, surfaces, sections, areas. Shortly you can extrude everything
Read More Extrude
Category: NX 11
“Rapid Dimension” command changes distances, length, diameter, radius, angle of the curves. Also, you can select different dimension methods by opening
Read More Rapid Dimension
Rapid Dimension
“Quick Extend” command extends curves to the nearest curve or selected boundary curve
There are three ways to start the “Quick Extend” command
Read More Quick Extend
Quick Extend
“Quick Trim” command trims curves through intersections.
There are three ways to start the “Quick Trim ” command.
Click the “Quick Trim” command on
Read More Quick Trim
Quick Trim
Offset Curve command offsets “curves in the sketch” or “edges on model” in sketch application. Offset curves are directly associated with their main curves.
Read More Offset Curve
Offset Curve
Mirror command creates a mirror pattern of curves that lie on the sketch. Mirrored curves are directly associated with their symmetry. All changes on the curve
Read More Mirror Curve
Mirror Curve
It creates points on the sketch.
There are two ways to create a point.
Click point command on Ribbon Bar.
Select point command from “menu=>insert=>Datum/Point=>
Read More Point
Point
There are three methods to create Arc
Press “A” on the keyboard. (Shortcut: A)
Click arc command on Ribbon Bar.
Select arc command from “menu=>insert=>
Read More Arc
Arc
The circle dialogue box opens after Circle command activated. There are two different methods for drawing circles. Circle by Center and
Read More Circle
Circle
The rectangle dialogue box opens after the rectangle command activated. There are three different methods for drawing rectangles.
Read More Rectangle